## Upload Configuration for OpenOCD
## ================================
## When properly configured, you can conveniently use
##  make clean all burn
## to build, upload and run the binary.


## Choose the programming adapter
## ------------------------------
## A file with this name and extension .cfg must exist in
## the OpenOCD interface directory.

## Use this with Turtelizer 2:
# BURNDONGLE=turtelizer2

## Original configuration:
BURNDONGLE = openocd-usb


## Choose the target board
## -----------------------
## A file with this name and extension .cfg must exist in
## the OpenOCD board directory.

# BURNBOARD = myboard

## Try to determine this automatically.

# ifeq ($(PLATFORM), ETHERNUT2)
# BURNBOARD = ethernut5
# endif

## Choose the target CPU
## ---------------------
## Typically this is specified in the board configuration.

BURNTARGET = stm32

## Choose the command sequence
## ---------------------------
##

## Terminates configuration stage. Use with all targets.
BURNCMDS  = -c init

## Works fine with the latest eir config.
#BURNCMDS += -c "run_flash_image ./$(TARG)"
#BURNCMDS += -c shutdown

## Running Ethernut 3 RAM images.
# BURNCMDS=-c init -c "run_ram_image ./$(TARG)" -c shutdown

## Example for an explicit command sequence.
# BURNCMDS=-c init -c "reset init" -c "load_image $IMGFILE 0" -c "verify_image $IMGFILE 0" -c "resume 0" -c shutdown

## Example for an command line chaining.
# BURNCMDS += -f $(top_srcdir)/tools/flash/flash.script
BURNCMDS += -c "reset init"
BURNCMDS += -c "halt"
BURNCMDS += -c "flash write_image erase ./$(ITARG) 0x08000000 bin"
BURNCMDS += -c "reset run"
# BURNCMDS += -f $(top_srcdir)/tools/flash/flash-exit.script

# Terminate OpenOCD. Use with all targets.
BURNCMDS += -c shutdown


# Choose the executable
# ---------------------
# Your OpenOCD executable may have a different name.
#
BURN=openocd


# No change required
# ------------------
# Anything below this line will typically work out of the box.
#
ifneq ($(BURNDONGLE),)
BURNCONFIG += -c "source [find interface/$(BURNDONGLE).cfg]"
endif
ifneq ($(BURNBOARD),)
BURNCONFIG += -c "source [find board/$(BURNBOARD).cfg]"
endif
ifneq ($(BURNTARGET),)
BURNCONFIG += -c "source [find target/$(BURNTARGET).cfg]"
endif

# BURNFLAGS=-s $(top_srcdir)/tools/turtelizer2 $(BURNCONFIG) $(BURNCMDS)
BURNFLAGS=$(BURNCONFIG) $(BURNCMDS)