/*
 * Copyright (C) 2005 by egnite Software GmbH. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the copyright holders nor the names of
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
 * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * For additional information see http://www.ethernut.de/
 *
 */

/*
 * $Log$
 * Revision 1.3  2009/01/16 19:45:42  haraldkipp
 * All ARM code is now running in system mode.
 *
 * Revision 1.2  2006/10/05 17:12:35  haraldkipp
 * Bug #1497065 fixed. Stack sizes increased.
 *
 * Revision 1.1  2005/10/24 11:30:48  haraldkipp
 * Initial check in.
 *
 */

#include <arch/arm.h>

IRQ_STACK_SIZE = (128*4)
FIQ_STACK_SIZE = (64*4)
ABT_STACK_SIZE = (16*4)
UND_STACK_SIZE = (16*4)
SVC_STACK_SIZE = (256*4)

/*
 * Section 0: Vector table and reset entry.
 */
        .section .init0,"ax",%progbits

        .global __vectors
__vectors:
        ldr     pc, [pc, #24]   /* Reset */
        ldr     pc, [pc, #24]   /* Undefined instruction */
        ldr     pc, [pc, #24]   /* Software interrupt */
        ldr     pc, [pc, #24]   /* Prefetch abort */
        ldr     pc, [pc, #24]   /* Data abort */
        ldr     pc, [pc, #24]   /* Reserved */

        /*
         * On IRQ the PC will be loaded from AIC_IVR, which
         * provides the address previously set in AIC_SVR.
         * The interrupt routine will be called in ARM_MODE_IRQ
         * with IRQ disabled and FIQ unchanged.
         */
        ldr     pc, [pc, #-0xF20]   /* Interrupt request, auto vectoring. */
        ldr     pc, [pc, #-0xF20]   /* Fast interrupt request, auto vectoring. */

        .word   _start
        .word   __undef
        .word   __swi
        .word   __prefetch_abort
        .word   __data_abort

        .weak   __undef
        .set    __undef, __xcpt_dummy
        .weak   __swi
        .set    __swi, __xcpt_dummy
        .weak   __prefetch_abort
        .set    __prefetch_abort, __xcpt_dummy
        .weak   __data_abort
        .set    __data_abort, __xcpt_dummy

        .global __xcpt_dummy
__xcpt_dummy:
        b       __xcpt_dummy

        .ltorg
        .globl	_start
_start:

/*
 * Section 1: Hardware initialization.
 */
        .section .init1,"ax",%progbits

        /*
         * Enable all clocks.
         */
        mvn     r0, #0
        ldr     r1, =PS_BASE
        str     r0, [r1, #0x04]

        b       __set_stacks

        .ltorg

        .global __set_stacks
__set_stacks:

/*
 * Section 2: Set stack pointers.
 */
        .section .init2,"ax",%progbits
        /*
         * Set exception stack pointers and enable interrupts.
         */
        ldr     r0, =__xcp_stack
        msr     CPSR_c, #ARM_MODE_FIQ | ARM_CPSR_I_BIT | ARM_CPSR_F_BIT
        mov     r13, r0
        sub     r0, r0, #FIQ_STACK_SIZE
        msr     CPSR_c, #ARM_MODE_IRQ | ARM_CPSR_I_BIT | ARM_CPSR_F_BIT
        mov     r13, r0
        sub     r0, r0, #IRQ_STACK_SIZE
        msr     CPSR_c, #ARM_MODE_ABORT | ARM_CPSR_I_BIT | ARM_CPSR_F_BIT
        mov     r13, r0
        sub     r0, r0, #ABT_STACK_SIZE
        msr     CPSR_c, #ARM_MODE_UNDEF | ARM_CPSR_I_BIT | ARM_CPSR_F_BIT
        mov     r13, r0
        sub     r0, r0, #UND_STACK_SIZE
        msr     CPSR_c, #ARM_MODE_SVC | ARM_CPSR_I_BIT | ARM_CPSR_F_BIT
        mov     r13, r0
        b       __enter_mode

        .rept   256
        .long   0
        .endr

        .global __xcp_stack
__xcp_stack:

        .ltorg

        .global __enter_mode
        .align
__enter_mode:
/*
 * Section 3: Enter system mode.
 */
        .section .init3,"ax",%progbits

        msr     CPSR_c, #ARM_MODE_SYS | ARM_CPSR_I_BIT | ARM_CPSR_F_BIT
        b       __clear_bss

        .ltorg

        .global __clear_bss
__clear_bss:
/*
 * Section 4: Clear bss.
 */
        .section .init4,"ax",%progbits

        ldr     r1, =__bss_start
        ldr     r2, =__bss_end
        ldr     r3, =0

_40:
        cmp     r1, r2
        strne   r3, [r1], #+4
        bne     _40

        /*
         * Initialize user stack pointer.
         */
        ldr     r13, =__stack
        b       __call_rtos

        .ltorg

        .global __call_rtos
__call_rtos:
/*
 * Section 5: Call RTOS
 */
        .section .init5,"ax",%progbits

        /*
         * Jump to Nut/OS initialization.
         */
        ldr     r0, =NutInit
        bx      r0

End:
        b       End

        .ltorg