-- -- * Copyright (C) 2010 by Ulrich Prinz (uprinz2@netscape.net) -- -- Redistribution and use in source and binary forms, with or without -- modification, are permitted provided that the following conditions -- are met: -- -- 1. Redistributions of source code must retain the above copyright -- notice, this list of conditions and the following disclaimer. -- 2. Redistributions in binary form must reproduce the above copyright -- notice, this list of conditions and the following disclaimer in the -- documentation and/or other materials provided with the distribution. -- 3. Neither the name of the copyright holders nor the names of -- contributors may be used to endorse or promote products derived -- from this software without specific prior written permission. -- -- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -- ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -- FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -- COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -- INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -- BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -- OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -- AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -- OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF -- THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -- SUCH DAMAGE. -- -- For additional information see http://www.ethernut.de/ -- -- ARM CortexM3 Architecture -- STMicroelectronics STM32F1 Family Devices -- -- $Id: stm32f1.nut 5628 2014-04-07 13:48:44Z u_bonnes $ -- -- stm32_memory_f10x = { "16", "32", "64", "128", "256", "384", "512", "768", "1024" } stm32_device_class = { "STM32F10X_LD", "STM32F10X_LD_VL", "STM32F10X_MD", "STM32F10X_MD_VL", "STM32F10X_HD", "STM32F10X_CL", "STM32F10X_XL" } -- -- ******************************************************************************** -- STM32F1 Family -- ******************************************************************************** -- nutarch_cm3_stm32f1 = { -- -- MCU Family -- { name = "nutarch_cm3_stm32f1_family", brief = "MCU F1 Family", sources = { "cm3/dev/stm/stm32f1_clk.c"}, options = { { macro = "MCU_STM32F1", brief = "STM32F1", type = "integer", default = 1, requires = { "HW_MCU_CM3" }, provides = { "HW_RCC_STM32", "HW_RTC_STM32F1", "HW_FLASH_STM32F1_3", "HW_GPIO_STM32V1", "HW_CRC32_STM32", "DEV_IRQ_STM32", "HW_EXTI04_STM32", "HW_WWDG_STM32", "HW_DMA1_STM32F1", "HW_EXTI95_STM32", "HW_I2C1_STM32", "HW_SPI1_STM32", "HW_USART1_STM32", "HW_USART2_STM32", "HW_EXTI1510_STM32", "HW_TIM2_STM32", "HW_TIM3_STM32", }, file = "include/cfg/arch.h" } } }, -- -- STM32F1 MCU Classes -- { name = "nutarch_cm3_stm32f_class", brief = "STM32F1 Device Classes", requires = { "HW_MCU_STM32" }, options = { { macro = "STM32F10X_LD", brief = "STM32F LD Series", description = "STM32F Low Density devices.", flavor = "booldata", exclusivity = stm32_device_class, makedefs = { "HWDEF+=-DSTM32F10X_LD" }, provides = { "STM32F10X_LD", "HW_USB_CAN1_STM32", "HW_TIM1_STM32", "HW_ADC1_2_STM32F1", }, file = "include/cfg/arch.h" }, { macro = "STM32F10X_LD_VL", brief = "STM32F LD-VL Series", description = "STM32F Low Density devices.", flavor = "booldata", exclusivity = stm32_device_class, makedefs = { "HWDEF+=-DSTM32F10X_LD_VL" }, provides = { "STM32F10X_LD_VL", "HW_CEC_STM32_STM32", "HW_TIM1_TIM15_TIM16_TIM17_STM32", "HW_TIM6_DAC_STM32", "HW_TIM7_STM32", "HW_ADC1_STM32F1", }, file = "include/cfg/arch.h" }, { macro = "STM32F10X_MD", brief = "STM32F MD Series", description = "STM32F Medium Density devices.", flavor = "booldata", exclusivity = stm32_device_class, makedefs = { "HWDEF+=-DSTM32F10X_MD" }, provides = { "STM32F10X_MD", "HW_USB_CAN1_STM32", "HW_TIM1_STM32", "HW_TIM4_STM32", "HW_I2C2_STM32", "HW_SPI2_STM32", "HW_USART3_STM32", "HW_ADC1_2_STM32F1", }, file = "include/cfg/arch.h" }, { macro = "STM32F10X_MD_VL", brief = "STM32F MD-VL Series", description = "STM32F Medium Density devices.", flavor = "booldata", exclusivity = stm32_device_class, makedefs = { "HWDEF+=-DSTM32F10X_MD_VL" }, provides = { "STM32F10X_MD_VL", "HW_TIM1_TIM15_TIM16_TIM17_STM32", "HW_TIM4_STM32", "HW_TIM6_DAC_STM32", "HW_TIM7_STM32", "HW_I2C2_STM32", "HW_SPI2_STM32", "HW_USART3_STM32", "HW_CEC_STM32", "HW_ADC1_STM32F1", }, file = "include/cfg/arch.h" }, { macro = "STM32F10X_HD", brief = "STM32F HD Series", description = "STM32F HD-Series devices.", flavor = "booldata", exclusivity = stm32_device_class, makedefs = { "HWDEF+=-DSTM32F10X_HD" }, provides = { "STM32F10X_HD", "HW_USB_CAN1_STM32", "HW_TIM1_STM32", "HW_TIM4_STM32", "HW_TIM5_STM32", "HW_TIM6_DAC_STM32", "HW_TIM7_STM32", "HW_TIM8_STM32", "HW_I2C2_STM32", "HW_SPI2_STM32", "HW_USART3_STM32", "HW_FSMC_STM32", "HW_SDIO_STM32", "HW_SPI3_STM32", "HW_UART4_STM32", "HW_UART5_STM32", "HW_DMA2_CH4_5_STM32F1", "HW_ADC1_2_STM32F1", "HW_ADC3_STM32F1", }, file = "include/cfg/arch.h" }, { macro = "STM32F10X_XL", brief = "STM32F XL Devices", description = "STM32F XL-Series devices.", flavor = "booldata", exclusivity = stm32_device_class, makedefs = { "HWDEF+=-DSTM32F10X_XL" }, provides = { "STM32F10X_XL", "HW_USB_CAN1_STM32", "HW_TIM1_TIM9_TIM10_TIM11_STM32", "HW_TIM4_STM32", "HW_TIM5_STM32", "HW_TIM6_STM32", "HW_TIM7_STM32", "HW_TIM8_TIM12_TIM13_TIM14_STM32", "HW_I2C2_STM32", "HW_SPI2_STM32", "HW_USART3_STM32", "HW_FSMC_STM32", "HW_SDIO_STM32", "HW_SPI3_STM32", "HW_UART4_STM32", "HW_UART5_STM32", "HW_DMA2_CH4_5_STM32F1", "HW_ADC1_2_STM32F1", "HW_ADC3_STM32F1", }, file = "include/cfg/arch.h" }, { macro = "STM32F10X_CL", brief = "STM32F CL Series", description = "STM32F Connectivity line devices.", flavor = "booldata", exclusivity = stm32_device_class, makedefs = { "HWDEF+=-DSTM32F10X_CL" }, provides = { "STM32F10X_CL", "HW_OTG_STM32", "HW_CAN1_STM32", "HW_CAN2_STM32", "HW_TIM1_STM32", "HW_TIM4_STM32", "HW_TIM5_STM32", "HW_TIM6_STM32", "HW_TIM7_STM32", "HW_I2C2_STM32", "HW_SPI2_STM32", "HW_USART3_STM32", "HW_OTG1_STM32", "HW_SPI3_STM32", "HW_UART4_STM32", "HW_UART5_STM32", "HW_EMAC_STM32", "HW_DMA2_STM32F1", "HW_ADC1_2_STM32F1", }, file = "include/cfg/arch.h" }, } }, -- -- STM32F Memory Configuration -- { name = "nutarch_cm3_stm32f_memory", brief = "STM32F Device Memory", requires = { "HW_MCU_STM32" }, options = { { macro = "MCU_STM32F10X", brief = "STM32F10x memory", description = "Select your devices memory by the marked alphanumeric code on the chip:\n".. "STM32F10x>Y