--
--  * Copyright (C) 2013 by Uwe Bonnes (bon@elektron.ikp.physik.tu-darmstadt.de)
--
-- Redistribution and use in source and binary forms, with or without
-- modification, are permitted provided that the following conditions
-- are met:
--
-- 1. Redistributions of source code must retain the above copyright
--    notice, this list of conditions and the following disclaimer.
-- 2. Redistributions in binary form must reproduce the above copyright
--    notice, this list of conditions and the following disclaimer in the
--    documentation and/or other materials provided with the distribution.
-- 3. Neither the name of the copyright holders nor the names of
--    contributors may be used to endorse or promote products derived
--    from this software without specific prior written permission.
--
-- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-- ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-- FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-- COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-- INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-- BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-- OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-- AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-- OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
-- THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-- SUCH DAMAGE.
--
-- For additional information see http://www.ethernut.de/
--

-- ARM CortexM3 Architecture
-- STMicroelectronics STM32L Family Devices
--
--
stm32_memory_f30 = { "128", "256" }
stm32_memory_f37 = { "64", "128", "256" }
stm32f3_device_class = { "STM32F302" , "STM32F303", "STM32F313", "STM32F373", "STM32F383" }

-- *****************************************************************************
-- STM32F30 Family
-- *****************************************************************************
--

nutarch_cm3_stm32f3 =
{

    --
    -- MCU Family
    --
    {
        name = "nutarch_cm3_stm32f3_family",
        brief = "MCU F3 Family",
        requires = { "HW_MCU_STM32F3XX" },
        sources = { "cm3/dev/stm/stm32f30_clk.c" },
        options =
        {
            {
                macro = "MCU_STM32F3",
                brief = "STM32F3 family",
                type = "integer",
                default = 1,
                provides =
                {
                    "HW_FLASH_STM32F1_3",
                    "HW_GPIO_STM32V2",
                    "HW_CRC32_STM32V2",
                    "DEV_IRQ_STM32",
                    "HW_DMA1_STM32F1",
                    "HW_DMA2_STM32F1",
                    "HW_EXTI04_STM32",
                    "HW_EXTI95_STM32",
                    "HW_EXTI1510_STM32",
                    "HW_I2C1_STM32V2",
                    "HW_I2C2_STM32V2",
                    "HW_SPI1_STM32",
                    "HW_SPI2_STM32",
                    "HW_SPI3_STM32",
                    "HW_USART1_STM32",
                    "HW_USART2_STM32",
                    "HW_USART3_STM32",
                    "HW_CAN1_STM32",
                    "HW_RTC_STM32_V2",
                    "HW_TIM2_32BIT_STM32",
                    "HW_TIM3_STM32",
                    "HW_TIM4_STM32",
                    "HW_TIM6_DAC_STM32",
                    "HW_DAC1_STM32",
                    "HW_GPIO",
                    "HW_MCU_FPU",
                },
                file = "include/cfg/arch.h"
            },
            {
                macro = "STM32F30X",
                brief = "STM32F40X",
                brief = "Include needed for STM32F302/303/313",
                type = "integer",
                requires = { "STM32F30X" },
                default = 1,
                provides =
                {
                    "HW_UART4_STM32",
                    "HW_UART5_STM32",
                    "HW_TIM1_TIM15_TIM16_TIM17_STM32",
                    "HW_TIM8_STM32",
                    "HW_ADC1_2_STM32",
                    "HW_COMP1_2_3_STM32",
                    "HW_COMP4_5_6_STM32",
                    "HW_COMP7_STM32",
                    "HW_OP1_2_STM32",
                 },
                file = "include/cfg/arch.h"
            },
            {
                macro = "STM32F37X",
                brief = "STM32F37X",
                brief = "Include needed for STM32F373/385",
                type = "integer",
                requires = { "LICENSE_MCD_ST_LIBERTY", "LICENSE_ST_GUIDANCE_ONLY", "STM32F37X" },
                default = 1,
                provides =
                {
                    "HW_TIM5_32BIT_STM32",
                    "HW_TIM7_STM32",
                    "HW_TIM12_STM32",
                    "HW_TIM13_STM32",
                    "HW_TIM14_STM32",
                    "HW_TIM15_STM32",
                    "HW_TIM16_STM32",
                    "HW_TIM17_STM32",
                    "HW_TIM18_DAC2_STM32",
                    "HW_TIM19_STM32",
                    "HW_CEC_STM32V2",
                    "HW_ADC1_STM32",
                    "HW_SDADC1_STM32",
                    "HW_SDADC2_STM32",
                    "HW_SDADC3_STM32",
                    "HW_COMP_STM32",
                 },
                makedefs = { "MCD_LICENSE=y" },
                file = "include/cfg/arch.h"
            },
        }
    },
    --
    -- STM32F30 Memory
    --
    {
        name = "nutarch_cm3_stm32F3_memory",
        brief = "STM32F30x Device Memory",
        requires = { "HW_MCU_STM32F3XX" },
        options =
        {
            {
                macro = "MCU_STM32F30X",
                brief = "STM32F30x memory",
                description = "Select your devices memory by the marked alphanumeric code on the chip:\n"..
                              "STM32F30x>Y<zz where Y is one of the list below.\n\n"..
                              "B =   128 kbytes Flash\n"..
                              "C =   256 kbytes Flash\n",
                requires = { "HW_MCU_STM32F30X" },
                type = "enumerated",
                choices = stm32_memory_f30,
                file = "include/cfg/arch.h",
            },
            {
                macro = "MCU_STM32F37X",
                brief = "STM32F37x memory",
                description = "Select your devices memory by the marked alphanumeric code on the chip:\n"..
                              "STM32F37x>Y<zz where Y is one of the list below.\n\n"..
                              "8 =    64 kbytes Flash\n"..
                              "B =   128 kbytes Flash\n"..
                              "C =   256 kbytes Flash\n",
                requires = { "HW_MCU_STM32F37X" },
                type = "enumerated",
                choices = stm32_memory_f37,
                file = "include/cfg/arch.h",
            },
        }
    },
}