#ifndef _ARCH_ARM_AT91_RSTC_H_ #define _ARCH_ARM_AT91_RSTC_H_ /* * Copyright (C) 2005-2006 by egnite Software GmbH. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the copyright holders nor the names of * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * For additional information see http://www.ethernut.de/ */ /*! * \file arch/arm/at91_rstc.h * \brief AT91 peripherals. * * \verbatim * * $Log$ * Revision 1.2 2006/08/31 19:13:15 haraldkipp * Wakeup bit and LSB of external reset length added. * * Revision 1.1 2006/07/05 07:45:28 haraldkipp * Split on-chip interface definitions. * * * \endverbatim */ /*! * \addtogroup xgNutArchArmAt91Rstc */ /*@{*/ /*! \name Reset Controller Control Register */ /*@{*/ #define RSTC_CR (RSTC_BASE + 0x00) /*!< \brief Reset controller control register address. */ #define RSTC_PROCRST 0x00000001 /*!< \brief Processor reset. */ #define RSTC_PERRST 0x00000004 /*!< \brief Peripheral reset. */ #define RSTC_EXTRST 0x00000008 /*!< \brief External reset. */ #define RSTC_KEY 0xA5000000 /*!< \brief Password. */ /*@}*/ /*! \name Reset Controller Status Register */ /*@{*/ #define RSTC_SR (RSTC_BASE + 0x04) /*!< \brief Reset controller status register address. */ #define RSTC_URSTS 0x00000001 /*!< \brief User reset status. */ #define RSTC_BODSTS 0x00000002 /*!< \brief Brownout detection status. */ #define RSTC_RSTTYP 0x00000700 /*!< \brief Reset type. */ #define RSTC_RSTTYP_POWERUP 0x00000000 /*!< \brief Power-up reset. */ #define RSTC_RSTTYP_WAKEUP 0x00000100 /*!< \brief VDDCORE rising. */ #define RSTC_RSTTYP_WATCHDOG 0x00000200 /*!< \brief Watchdog reset. */ #define RSTC_RSTTYP_SOFTWARE 0x00000300 /*!< \brief Software reset. */ #define RSTC_RSTTYP_USER 0x00000400 /*!< \brief User reset. */ #define RSTC_RSTTYP_BROWNOUT 0x00000500 /*!< \brief Brownout reset. */ #define RSTC_NRSTL 0x00010000 /*!< \brief NRST pin level. */ #define RSTC_SRCMP 0x00020000 /*!< \brief Software reset command in progress. */ /*@}*/ /*! \name Reset Controller Mode Register */ /*@{*/ #define RSTC_MR (RSTC_BASE + 0x08) /*!< \brief Reset controller mode register address. */ #define RSTC_URSTEN 0x00000001 /*!< \brief User reset enable. */ #define RSTC_URSTIEN 0x00000010 /*!< \brief User reset interrupt enable. */ #define RSTC_ERSTL 0x00000F00 /*!< \brief External reset length. */ #define RSTC_ERSTL_LSB 8 /*!< \brief Least significant bit of external reset length. */ #define RSTC_BODIEN 0x00010000 /*!< \brief Brown-out detection interrupt enable. */ #define RSTC_KEY_MSK 0xFF000000 /*!< \brief Password mask. */ /*@}*/ /*@} xgNutArchArmAt91Rstc */ #endif /* _ARCH_ARM_AT91_RSTC_H_ */