#ifndef _ARCH_ARM_SAM7S_H_ #define _ARCH_ARM_SAM7S_H_ /* * Copyright (C) 2006-2007 by egnite Software GmbH. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the copyright holders nor the names of * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * For additional information see http://www.ethernut.de/ */ /*! * Change to sam7s.h * By Justin Bennett, 2007/09/12 * * \file arch/arm/at91sam7s.h * \brief AT91 peripherals. * * \verbatim * * Revision 1.2 2010/12/15 21:46:28 ve2yag * Add PWM interrupt support for AT91SAM7S and SE. * * Revision 1.1 2007/09/12 jbennett * Branched from at91sam7x.h version 1.7 * * * \endverbatim */ #define FLASH_BASE 0x100000UL #define RAM_BASE 0x200000UL #define TC_BASE 0xFFFA0000 /*!< \brief Timer/counter base address. */ #define UDP_BASE 0xFFFB0000 /*!< \brief USB device port base address. */ #define TWI_BASE 0xFFFB8000 /*!< \brief Two-wire interface base address. */ #define USART0_BASE 0xFFFC0000 /*!< \brief USART 0 base address. */ #define USART1_BASE 0xFFFC4000 /*!< \brief USART 1 base address. */ #define PWMC_BASE 0xFFFCC000 /*!< \brief PWM controller base address. */ #define SSC_BASE 0xFFFD4000 /*!< \brief Serial synchronous controller base address. */ #define ADC_BASE 0xFFFD8000 /*!< \brief ADC base address. */ #define SPI0_BASE 0xFFFE0000 /*!< \brief SPI0 base address. */ #define AIC_BASE 0xFFFFF000 /*!< \brief AIC base address. */ #define DBGU_BASE 0xFFFFF200 /*!< \brief DBGU base address. */ #define PIOA_BASE 0xFFFFF400 /*!< \brief PIO A base address. */ #define PMC_BASE 0xFFFFFC00 /*!< \brief PMC base address. */ #define RSTC_BASE 0xFFFFFD00 /*!< \brief Resect controller register base address. */ #define RTT_BASE 0xFFFFFD20 /*!< \brief Realtime timer base address. */ #define PIT_BASE 0xFFFFFD30 /*!< \brief Periodic interval timer base address. */ #define WDT_BASE 0xFFFFFD40 /*!< \brief Watch Dog register base address. */ #define VREG_BASE 0xFFFFFD60 /*!< \brief Voltage regulator mode controller base address. */ #define MC_BASE 0xFFFFFF00 /*!< \brief Memory controller base. */ #define PERIPH_RPR_OFF 0x00000100 /*!< \brief Receive pointer register offset. */ #define PERIPH_RCR_OFF 0x00000104 /*!< \brief Receive counter register offset. */ #define PERIPH_TPR_OFF 0x00000108 /*!< \brief Transmit pointer register offset. */ #define PERIPH_TCR_OFF 0x0000010C /*!< \brief Transmit counter register offset. */ #define PERIPH_RNPR_OFF 0x00000110 /*!< \brief Receive next pointer register offset. */ #define PERIPH_RNCR_OFF 0x00000114 /*!< \brief Receive next counter register offset. */ #define PERIPH_TNPR_OFF 0x00000118 /*!< \brief Transmit next pointer register offset. */ #define PERIPH_TNCR_OFF 0x0000011C /*!< \brief Transmit next counter register offset. */ #define PERIPH_PTCR_OFF 0x00000120 /*!< \brief PDC transfer control register offset. */ #define PERIPH_PTSR_OFF 0x00000124 /*!< \brief PDC transfer status register offset. */ #define PDC_RXTEN 0x00000001 /*!< \brief Receiver transfer enable. */ #define PDC_RXTDIS 0x00000002 /*!< \brief Receiver transfer disable. */ #define PDC_TXTEN 0x00000100 /*!< \brief Transmitter transfer enable. */ #define PDC_TXTDIS 0x00000200 /*!< \brief Transmitter transfer disable. */ #define DBGU_HAS_PDC #define SPI_HAS_PDC #define SSC_HAS_PDC #define USART_HAS_PDC #define USART_HAS_MODE #define PIO_HAS_MULTIDRIVER #define PIO_HAS_PULLUP #define PIO_HAS_PERIPHERALSELECT #define PIO_HAS_OUTPUTWRITEENABLE #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /*! \addtogroup xgNutArchArmAt91Sam7x */ /*@{*/ /*! \name Peripheral Identifiers and Interrupts */ /*@{*/ #define FIQ_ID 0 /*!< \brief Fast interrupt ID. */ #define SYSC_ID 1 /*!< \brief System interrupt ID. */ #define PIOA_ID 2 /*!< \brief Parallel I/O controller ID. */ /* Reserved 3*/ #define ADC_ID 4 /*!< \brief Analog to digital converter ID. */ #define SPI0_ID 5 /*!< \brief Serial peripheral interface 0 ID. */ #define US0_ID 6 /*!< \brief USART 0 ID. */ #define US1_ID 7 /*!< \brief USART 1 ID. */ #define SSC_ID 8 /*!< \brief Synchronous serial controller ID. */ #define TWI_ID 9 /*!< \brief Two-wire interface ID. */ #define PWMC_ID 10 /*!< \brief PWM controller ID. */ #define UDP_ID 11 /*!< \brief USB device port ID. */ #define TC0_ID 12 /*!< \brief Timer 0 ID. */ #define TC1_ID 13 /*!< \brief Timer 1 ID. */ #define TC2_ID 14 /*!< \brief Timer 2 ID. */ /* Reserved 15-29*/ #define IRQ0_ID 30 /*!< \brief External interrupt 0 ID. */ #define IRQ1_ID 31 /*!< \brief External interrupt 1 ID. */ /*@}*/ /*! \name Historical SPI0 Peripheral Multiplexing Names */ /*@{*/ #define SPI0_NPCS0_PA11A 11 /*!< \brief Port bit number on PIO-A Perpheral A. */ #define SPI0_NPCS1_PA09B 9 /*!< \brief Port bit number on PIO-A Perpheral B. */ #define SPI0_NPCS1_PA31A 31 /*!< \brief Port bit number on PIO-A Perpheral A. */ #define SPI0_NPCS2_PA10B 10 /*!< \brief Port bit number on PIO-A Perpheral B. */ #define SPI0_NPCS2_PA30B 30 /*!< \brief Port bit number on PIO-A Perpheral B. */ #define SPI0_NPCS3_PA03B 3 /*!< \brief Port bit number on PIO-A Perpheral B. */ #define SPI0_NPCS3_PA05B 5 /*!< \brief Port bit number on PIO-A Perpheral B. */ #define SPI0_NPCS3_PA22B 22 /*!< \brief Port bit number on PIO-A Perpheral B. */ #define SPI0_MISO_PA12A 12 /*!< \brief Port bit number on PIO-A Perpheral A. */ #define SPI0_MOSI_PA13A 13 /*!< \brief Port bit number on PIO-A Perpheral A. */ #define SPI0_SPCK_PA14A 14 /*!< \brief Port bit number on PIO-A Perpheral A. */ /*@}*/ /*! \name USART Peripheral Multiplexing */ /*@{*/ #define PA5_RXD0_A 5 #define PA6_TXD0_A 6 #define PA2_SCK0_B 2 #define PA7_RTS0_A 7 #define PA8_CTS0_A 8 #define PA21_RXD1_A 21 #define PA22_TXD1_A 22 #define PA23_SCK1_A 23 #define PA24_RTS1_A 24 #define PA25_CTS1_A 25 #define PB26_DCD1_A 26 #define PB28_DSR1_A 28 #define PB27_DTR1_A 27 #define PB29_RI1_A 29 /*@}*/ /*! \name SPI Peripheral Multiplexing */ /*@{*/ #define PA12_SPI0_MISO_A 12 #define PA13_SPI0_MOSI_A 13 #define PA14_SPI0_SPCK_A 14 #define PA11_SPI0_NPCS0_A 11 #define PA9_SPI0_NPCS1_B 9 #define PA31_SPI0_NPCS1_A 31 #define PA10_SPI0_NPCS2_B 10 #define PB30_SPI0_NPCS2_B 30 #define PA3_SPI0_NPCS3_B 3 #define PA5_SPI0_NPCS3_B 5 #define PA22_SPI0_NPCS3_B 22 #define SPI0_PINS _BV(PA12_SPI0_MISO_A) | _BV(PA13_SPI0_MOSI_A) | _BV(PA14_SPI0_SPCK_A) #define SPI0_PIO_BASE PIOA_BASE #define SPI0_PSR_OFF PIO_ASR_OFF #define SPI0_CS0_PIN _BV(PA11_SPI0_NPCS0_A) #define SPI0_CS0_PIO_BASE PIOA_BASE #define SPI0_CS0_PSR_OFF PIO_ASR_OFF #ifndef SPI0_CS1_PIN #define SPI0_CS1_PIN _BV(PA9_SPI0_NPCS1_B) #define SPI0_CS1_PIO_BASE PIOA_BASE #define SPI0_CS1_PSR_OFF PIO_ASR_OFF #endif #ifndef SPI0_CS2_PIN #define SPI0_CS2_PIN _BV(PA10_SPI0_NPCS2_B) #define SPI0_CS2_PIO_BASE PIOA_BASE #define SPI0_CS2_PSR_OFF PIO_ASR_OFF #endif #ifndef SPI0_CS3_PIN #define SPI0_CS3_PIN _BV(PA3_SPI0_NPCS3_B) #define SPI0_CS3_PIO_BASE PIOA_BASE #define SPI0_CS3_PSR_OFF PIO_ASR_OFF #endif /*@}*/ /*! \name Debug Unit Peripheral Multiplexing */ /*@{*/ #define PA9_DRXD_A 9 #define PA10_DTXD_A 10 /*@}*/ /*! \name Synchronous Serial Controller Peripheral Multiplexing */ /*@{*/ #define PA17_TD_A 17 /*!< \brief Transmit data pin. */ #define PA18_RD_A 18 /*!< \brief Receive data pin. */ #define PA16_TK_A 16 /*!< \brief Transmit clock pin. */ #define PA19_RK_A 19 /*!< \brief Receive clock pin. */ #define PA15_TF_A 15 /*!< \brief Transmit frame sync. pin. */ #define PA20_RF_A 20 /*!< \brief Receive frame sync. pin. */ /*@}*/ /*! \name Two Wire Interface Peripheral Multiplexing */ /*@{*/ #define PA3_TWD_A 3 /*!< \brief Two wire serial data pin. */ #define PA4_TWCK_A 4 /*!< \brief Two wire serial clock pin. */ /*@}*/ /*! \name Timer/Counter Peripheral Multiplexing */ /*@{*/ #define PA0_TIOA0_B 0 #define PA1_TIOB0_B 1 #define PA4_TCLK0_B 4 #define PA15_TIOA1_B 15 #define PA16_TIOB1_B 16 #define PA28_TCLK1_B 28 #define PA26_TIOA2_B 26 #define PA27_TIOB2_B 27 #define PA29_TCLK2_B 29 /*@}*/ /*! \name Clocks, Oscillators and PLLs Peripheral Multiplexing */ /*@{*/ #define PA6_PCK0_B 6 #define PA17_PCK1_B 17 #define PA21_PCK1_B 21 #define PA18_PCK2_B 18 #define PA31_PCK2_B 31 /*@}*/ /*! \name Advanced Interrupt Controller Peripheral Multiplexing */ /*@{*/ #define PA19_FIQ_B 19 #define PA20_IRQ0_B 20 #define PA30_IRQ1_A 30 /*@}*/ /*! \name ADC Interface Peripheral Multiplexing */ /*@{*/ #define PA8_ADTRG_B 8 /*!< \brief ADC trigger pin. */ /*@}*/ /*! \name PWM Peripheral Multiplexing */ /*@{*/ #define PA0_PWM0_A 0 #define PA23_PWM0_B 23 #define PA1_PWM1_A 1 #define PA24_PWM1_B 24 #define PA2_PWM2_A 2 #define PA13_PWM2_B 13 #define PA25_PWM2_B 25 #define PA7_PWM3_B 7 #define PA14_PWM3_B 14 /*@}*/ /*@} xgNutArchArmAt91 */ #endif /* _ARCH_ARM_AT91SAM7S_H_ */