ih_spm_ready.c 4.0 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130
  1. /*
  2. * Copyright (C) 2001-2005 by egnite Software GmbH. All rights reserved.
  3. *
  4. * Redistribution and use in source and binary forms, with or without
  5. * modification, are permitted provided that the following conditions
  6. * are met:
  7. *
  8. * 1. Redistributions of source code must retain the above copyright
  9. * notice, this list of conditions and the following disclaimer.
  10. * 2. Redistributions in binary form must reproduce the above copyright
  11. * notice, this list of conditions and the following disclaimer in the
  12. * documentation and/or other materials provided with the distribution.
  13. * 3. Neither the name of the copyright holders nor the names of
  14. * contributors may be used to endorse or promote products derived
  15. * from this software without specific prior written permission.
  16. *
  17. * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  18. * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  19. * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  20. * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
  21. * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
  22. * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
  23. * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
  24. * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
  25. * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  26. * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
  27. * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  28. * SUCH DAMAGE.
  29. *
  30. * For additional information see http://www.ethernut.de/
  31. *
  32. */
  33. /*!
  34. * \file arch/avr/dev/ih_spm_ready.c
  35. * \brief Store program memory ready interrupt.
  36. *
  37. * \verbatim
  38. * $Id: ih_spm_ready.c 4706 2012-10-06 17:42:01Z haraldkipp $
  39. * \endverbatim
  40. */
  41. #include <dev/irqreg.h>
  42. /*!
  43. * \addtogroup xgIrqReg
  44. */
  45. /*@{*/
  46. /* avr-libc names the vector as in the datasheets. As Atmel naming is
  47. * inconsistant, so is the avr-libc naming.
  48. * Equalize!
  49. */
  50. #if !defined(SPM_READY_vect) && defined(SPM_RDY_vect)
  51. #define SPM_READY_vect SPM_RDY_vect
  52. #endif
  53. #if defined(SPM_READY_vect) || defined(iv_SPM_READY)
  54. static int AvrSpmRdyIrqCtl(int cmd, void *param);
  55. IRQ_HANDLER sig_SPM_READY = {
  56. #ifdef NUT_PERFMON
  57. 0, /* Interrupt counter, ir_count. */
  58. #endif
  59. NULL, /* Passed argument, ir_arg. */
  60. NULL, /* Handler subroutine, ir_handler. */
  61. AvrSpmRdyIrqCtl /* Interrupt control, ir_ctl. */
  62. };
  63. /*!
  64. * \brief Store program memory ready interrupt control.
  65. *
  66. * \param cmd Control command.
  67. * - NUT_IRQCTL_INIT Initialize and disable interrupt.
  68. * - NUT_IRQCTL_ENABLE Enable interrupt.
  69. * - NUT_IRQCTL_DISABLE Disable interrupt.
  70. * - NUT_IRQCTL_GETPRIO Query interrupt priority.
  71. * - NUT_IRQCTL_GETCOUNT Query and clear interrupt counter.
  72. * \param param Pointer to optional parameter.
  73. *
  74. * \return 0 on success, -1 otherwise.
  75. */
  76. static int AvrSpmRdyIrqCtl(int cmd, void *param)
  77. {
  78. int rc = 0;
  79. unsigned int *ival = (unsigned int *) param;
  80. int_fast8_t enabled = bit_is_set(SPMCSR, SPMIE);
  81. /* Disable interrupt. */
  82. cbi(EECR, EERIE);
  83. switch (cmd) {
  84. case NUT_IRQCTL_INIT:
  85. case NUT_IRQCTL_DISABLE:
  86. enabled = 0;
  87. break;
  88. case NUT_IRQCTL_ENABLE:
  89. enabled = 1;
  90. break;
  91. case NUT_IRQCTL_GETPRIO:
  92. *ival = 0;
  93. break;
  94. #ifdef NUT_PERFMON
  95. case NUT_IRQCTL_GETCOUNT:
  96. *ival = (unsigned int) sig_SPM_READY.ir_count;
  97. sig_SPM_READY.ir_count = 0;
  98. break;
  99. #endif
  100. default:
  101. rc = -1;
  102. break;
  103. }
  104. /* Enable interrupt. */
  105. if (enabled) {
  106. sbi(SPMCSR, SPMIE);
  107. }
  108. return rc;
  109. }
  110. /*! \fn SPM_RDY_vect(void)
  111. * \brief Store program memory interrupt entry.
  112. */
  113. #ifdef __IMAGECRAFT__
  114. #pragma interrupt_handler SPM_READY_vect:iv_SPM_READY
  115. #endif
  116. NUTSIGNAL(SPM_READY_vect, sig_SPM_READY)
  117. #endif
  118. /*@}*/