gpioa_sam3u.c 3.0 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105
  1. /*!
  2. * Copyright (C) 2007 by egnite Software GmbH. All rights reserved.
  3. *
  4. * Redistribution and use in source and binary forms, with or without
  5. * modification, are permitted provided that the following conditions
  6. * are met:
  7. *
  8. * 1. Redistributions of source code must retain the above copyright
  9. * notice, this list of conditions and the following disclaimer.
  10. * 2. Redistributions in binary form must reproduce the above copyright
  11. * notice, this list of conditions and the following disclaimer in the
  12. * documentation and/or other materials provided with the distribution.
  13. * 3. Neither the name of the copyright holders nor the names of
  14. * contributors may be used to endorse or promote products derived
  15. * from this software without specific prior written permission.
  16. *
  17. * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  18. * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  19. * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  20. * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
  21. * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
  22. * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
  23. * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
  24. * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
  25. * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  26. * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
  27. * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  28. * SUCH DAMAGE.
  29. *
  30. * For additional information see http://www.ethernut.de/
  31. */
  32. /*!
  33. * $Id: gpioa_sam3u.c 4590 2012-09-10 10:26:01Z olereinhardt $
  34. */
  35. #include <arch/cm3.h>
  36. #include <stdlib.h>
  37. #include <string.h>
  38. #include <dev/gpio.h>
  39. /*!
  40. * \brief PIO interrupt service.
  41. */
  42. static void PioIsrA(void *arg)
  43. {
  44. GPIO_VECTOR *vct = (GPIO_VECTOR *)arg;
  45. unsigned int isr = inr(AT91C_PIOA_ISR);
  46. while (isr) {
  47. if ((isr & 1) != 0 && vct->iov_handler) {
  48. (vct->iov_handler) (vct->iov_arg);
  49. }
  50. isr >>= 1;
  51. vct++;
  52. }
  53. }
  54. /*!
  55. * \brief PIO interrupt control.
  56. */
  57. static int PioCtlA(int cmd, void *param, int bit)
  58. {
  59. int rc = 0;
  60. unsigned int *ival = (unsigned int *) param;
  61. uint32_t enabled = inr(AT91C_PIOA_IMR) & _BV(bit);
  62. /* Disable interrupt. */
  63. if (enabled) {
  64. outr(AT91C_PIOA_IDR, _BV(bit));
  65. }
  66. switch (cmd) {
  67. case NUT_IRQCTL_STATUS:
  68. if (enabled) {
  69. *ival |= 1;
  70. } else {
  71. *ival &= ~1;
  72. }
  73. break;
  74. case NUT_IRQCTL_ENABLE:
  75. enabled = 1;
  76. break;
  77. case NUT_IRQCTL_DISABLE:
  78. enabled = 0;
  79. break;
  80. default:
  81. rc = -1;
  82. break;
  83. }
  84. /* Enable interrupt. */
  85. if (enabled) {
  86. outr(AT91C_PIOA_IER, _BV(bit));
  87. }
  88. return rc;
  89. }
  90. GPIO_SIGNAL sig_GPIO1 = {
  91. &sig_PIOA, /* ios_sig */
  92. PioIsrA, /* ios_handler */
  93. PioCtlA, /* ios_ctl */
  94. NULL /* ios_vector */
  95. };