| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161 |
- /*
- * Copyright (C) 2008 by Thermotemp GmbH. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the copyright holders nor the names of
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THERMOTEMP GMBH AND CONTRIBUTORS
- * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THERMOTEMP
- * GMBH OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
- * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * For additional information see http://www.ethernut.de/
- */
- /*
- * This demo demonstrates the usage of the bootloader
- *
- */
- #include <stdio.h>
- #include <string.h>
- #include <io.h>
- #include <dev/board.h>
- #include <dev/nvmem.h>
- #include <dev/watchdog.h>
- #include <sys/timer.h>
- #define TRUE 1
- #define FALSE 0
- #ifndef EE_CONFBOOT
- #define EE_CONFBOOT 0x80 /* Offset in eeprom we store the boot info structure */
- #endif
- /*
- * Boot configuration structure.
- */
- typedef struct __attribute__ ((packed)) _CONFBOOT {
- unsigned char cb_size; /* Size of this structure. */
- unsigned char cb_flags; /* Currently unused */
- unsigned long cb_tftp_ip; /* IP address of the TFTP server */
- char cb_image[58]; /* Name of the image file to load */
- u_char digest[16]; /* MD5 digest */
- int size; /* Size of the image */
- } CONFBOOT;
- CONFBOOT confboot;
- /* Reset the processor using the reset controller */
- void boot(void)
- {
- printf("Booting...\r\n");
- NutSleep(100);
- outr(RSTC_CR, RSTC_KEY | RSTC_EXTRST | RSTC_PERRST | RSTC_PROCRST);
- }
- /* Read boot configuration from non-volatile memory. */
- static int read_boot_config(void)
- {
- int rc;
- rc = NutNvMemLoad(EE_CONFBOOT, &confboot, sizeof(CONFBOOT));
- if (confboot.cb_size != sizeof(CONFBOOT)) {
- rc = -1;
- }
- return rc;
- }
- /* Store boot configuration in non-volatile memory. */
- static void write_boot_config(void)
- {
- confboot.cb_size = sizeof(CONFBOOT);
- NutNvMemSave(EE_CONFBOOT, &confboot, sizeof(CONFBOOT));
- }
- /* Init the uart */
- FILE *init_uart(void)
- {
- u_long baud = 115200;
- u_long cookedmode = FALSE;
- FILE *uart0;
- /* Init the debug UART */
- NutRegisterDevice(&DEV_UART, 0, 0);
- uart0 = fopen(DEV_UART_NAME, "r+");
- _ioctl(_fileno(uart0), UART_SETSPEED, &baud);
- _ioctl(_fileno(uart0), UART_SETCOOKEDMODE, &cookedmode);
- freopen(DEV_UART_NAME, "w", stdout);
- freopen(DEV_UART_NAME, "r", stdin);
- freopen(DEV_UART_NAME, "w", stderr);
- return uart0;
- }
- static char inbuf[128];
- int main(void)
- {
- char *cp;
- int i;
- FILE *uart = init_uart();
- printf("Demo application for at91sam7x_bootloader started...\r\n");
- for (i = 0;; i++) {
- printf("\nEnter \"reset\" to reset or \"boot\" to reboot from tftp server:\r\n");
- fflush(uart);
- fgets(inbuf, 10, uart);
- /*
- * Chop off trailing linefeed.
- */
- cp = strchr(inbuf, '\n');
- if (cp) {
- *cp = 0;
- }
- /* Check if the string is "boot" or "load" */
- if (strcmp(inbuf, "reset") == 0) {
- printf("Reset...\r\n");
- boot();
- } else
- if (strcmp(inbuf, "boot") == 0) {
- printf("Reboot from tftp server\r\n");
- read_boot_config();
- memset(confboot.digest, 0, sizeof(confboot.digest));
- write_boot_config();
- boot();
- } else {
- printf("You entered: %s\r\n", inbuf);
- }
- }
- return 0;
- }
|