2.3-InternetRadio/nutos/nut/conf/evk1105-intram.conf

--
-- Copyright (C) 2001-2010 by egnite Software GmbH
--
-- All rights reserved.
--
-- Redistribution and use in source and binary forms, with or without
-- modification, are permitted provided that the following conditions
-- are met:
--
-- 1. Redistributions of source code must retain the above copyright
--    notice, this list of conditions and the following disclaimer.
-- 2. Redistributions in binary form must reproduce the above copyright
--    notice, this list of conditions and the following disclaimer in the
--    documentation and/or other materials provided with the distribution.
-- 3. Neither the name of the copyright holders nor the names of
--    contributors may be used to endorse or promote products derived
--    from this software without specific prior written permission.
--
-- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-- ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-- FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-- COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-- INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-- BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-- OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-- AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-- OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
-- THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-- SUCH DAMAGE.
--
-- For additional information see http://www.ethernut.de/
--

--
-- Nut/OS configuration for Atmel EVK1105.
--
-- $Id$
--

--
-- NUTMEM_SIZE and NUTMEM_START, is not needed here, 
-- the linker script will be used for this information.
--

PLATFORM = "EVK1105"
AVR32_GCC = ""
LDSCRIPT = "uc3a0512_rom"
MCU_AVR32UC3A0512 = ""
MCU_AVR32 = "1"
OSC0_VAL = "12000000"
PLL_MUL_VAL = "9"
PLL_DIV_VAL = "1"                             
PLL_FREQ_VAL = "1"
PLL_DIV2_VAL = "1"
PLL_WBWD_VAL = "0"
PLL_PBADIV_VAL = "1"
PLL_PBASEL_VAL = "1"
PLL_PBBDIV_VAL = "0"
PLL_PBBSEL_VAL = "0"
PLL_HSBDIV_VAL = "0"
PLL_HSBSEL_VAL = "0"
NUTMEM_SDRAM_BASE = "0xD0000000"
NUTMEM_SDRAM_COLBITS = "9"
NUTMEM_SDRAM_ROWBITS = "13"
NUTMEM_SDRAM_BANKS = "2"
NUTMEM_SDRAM_CASLAT = "2"
NUTMEM_SDRAM_DBW = "16"
NUTMEM_SDRAM_TWR = "14"
NUTMEM_SDRAM_TRC = "60"
NUTMEM_SDRAM_TRP = "15"
NUTMEM_SDRAM_TRCD = "15"
NUTMEM_SDRAM_TRAS = "37"
NUTMEM_SDRAM_TXSR = "67"
NUTMEM_SDRAM_TR = "7812"
NUTMEM_SDRAM_TMRD = "2"
NIC_PHY_ADDR = "0x01"
NIC_PHY_UID = "0x20005C90"
INTERRUPT0_ALT_PIN = "7"
INTERRUPT0_ALT_PINSET = "ALTERNATE_PIN_SET1"
INTERRUPT1_ALT_PIN = "0"
INTERRUPT1_ALT_PINSET = "ALTERNATE_PIN_SET1"
INTERRUPT2_ALT_PIN = "0"
INTERRUPT2_ALT_PINSET = "ALTERNATE_PIN_SET1"
INTERRUPT3_ALT_PIN = "0"
INTERRUPT3_ALT_PINSET = "ALTERNATE_PIN_SET1"
INTERRUPT4_ALT_PIN = "0"
INTERRUPT4_ALT_PINSET = "ALTERNATE_PIN_SET1"
INTERRUPT5_ALT_PIN = "0"
INTERRUPT5_ALT_PINSET = "ALTERNATE_PIN_SET1"
INTERRUPT6_ALT_PIN = "0"
INTERRUPT6_ALT_PINSET = "ALTERNATE_PIN_SET1"
INTERRUPT7_ALT_PIN = "0"
INTERRUPT7_ALT_PINSET = "ALTERNATE_PIN_SET1"
INTERRUPT_NMI_ALT_PIN = "0"
INTERRUPT_NMI_ALT_PINSET = "ALTERNATE_PIN_SET2"
SPI0_CS0_PIO_ID = "PIOA_ID"
SPI0_CS0_PIO_BIT = "10"
SPI0_CS1_PIO_ID = "PIOA_ID"
SPI0_CS1_PIO_BIT = "8"
SPI0_CS2_PIO_ID = "PIOA_ID"
SPI0_CS2_PIO_BIT = "9"
NUT_THREAD_IDLESTACK = "512"
NUT_THREAD_MAINSTACK = "1024"
CONFNET_NVMEM = ""