| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647 |
- --
- -- Nut/OS configuration for STEVAL-PCC0101V2 http://www.st.com/internet/evalboard/product/251530.jsp
- --
- -- STM32F207VG with 25 MHz quarz
- --
- -- Default Strapping
- -- MII address 1 JP11=1, JP12=JP13=JP14=JP15=0
- -- Powered (JP1 ON)
- -- No Loopback (JP8 off)
- -- MII mode (JP9 = 0)
- -- 25 MHz crystal to EMAC (SB1/SB2 closed)
- -- No EMAC remapping
- --
- -- CN3 P13/PD5/USART2 TX remapped P15/PD6 RX remapped
- PLATFORM = "STEVAL_PCC010V2"
- CM3_GCC = ""
- LDSCRIPT = "stm32f205xG_flash"
- MCU_STM32F207 = "1"
- MCU_STM32 = "1"
- STM32F207 = "1"
- MCU_STM32F2XX = "1024"
- SYSCLK_SOURCE = "SYSCLK_PLL"
- PLLCLK_SOURCE = "PLLCLK_HSE"
- HSE_VALUE = "25000000"
- SYSCLK_FREQ = "120000000"
- USART1_SUPPORT_IRQ = ""
- USART2_REMAP_USART = ""
- USART2_SUPPORT_IRQ = ""
- USART3_PARTREMAP_USART = ""
- UART4_SUPPORT_IRQ = ""
- UART5_SUPPORT_IRQ = ""
- I2CBUS1_AS_DEFAULT = ""
- I2CBUS1_REMAP_I2C = ""
- CANBUS1_REMAP_CAN = "2"
- CANBUS2_REMAP_CAN = "1"
- NUTMEM_SIZE = "0x10000"
- NUTMEM_START = "0x20000000"
- NUTDEBUG = ""
- NUTDEBUG_CHECK_STACK = ""
- NUT_CONFIG_STM32FLASH = ""
- FLASH_CONF_SECTOR = "0x0803f800"
- NIC_PHY_TYPE = "AUTO"
- NIC_PHY_ADDR = "1"
- CRT_UNSETENV_POSIX = ""
- NUT_THREAD_TCPSMSTACK = "1024"
- NUT_THREAD_DHCPSTACK = "1024"
- NUT_THREAD_SNTPSTACK = "1024"
|
