| 1234567891011121314151617181920212223242526272829303132333435 |
- --
- -- Nut/OS configuration for proconX XNUT-105 board - http://www.proconx.com/xnut105
- -- This version is for serial no >= 320 with AT90CAN128 RevD chip.
- --
- -- $Id: xnut-105d.conf 3781 2012-01-23 08:25:29Z haraldkipp $
- --
- PLATFORM="XNUT_105"
- NUT_INIT_BOARD = ""
- AVR_GCC = ""
- GCC_DEBUG = ""
- MCU_AT90CAN128 = ""
- NUTMEM_SIZE = "4096"
- NUTMEM_START = "0x100"
- NUTXMEM_SIZE = "28416"
- NUTXMEM_START = "0x1100"
- NUT_THREAD_IDLESTACK = "384"
- NUT_THREAD_MAINSTACK = "768"
- NUT_CPU_FREQ = "12000000"
- CONFOS_EE_OFFSET = "0"
- UART0_RTS_BIT = "4"
- UART0_RTS_AVRPORT = "AVRPORTB"
- UART0_CTS_IRQ = "INT6"
- UART0_HDX_BIT = "1"
- UART0_HDX_AVRPORT = "AVRPORTB"
- UART0_DTR_BIT = "5"
- UART0_DTR_AVRPORT = "AVRPORTB"
- UART1_HDX_BIT = "3"
- UART1_HDX_AVRPORT = "AVRPORTB"
- RTL_BASE_ADDR = "0x8300"
- RTL_SIGNAL_IRQ = "INT5"
- RTL_IRQ_RISING_EDGE = ""
- RTL_RESET_BIT = "7"
- RTL_RESET_AVRPORT = "AVRPORTD"
- CONFNET_NVMEM = ""
|
