elektor_ir1.h 2.6 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798
  1. /*
  2. * Copyright 2011 by egnite GmbH
  3. *
  4. * All rights reserved.
  5. *
  6. * Redistribution and use in source and binary forms, with or without
  7. * modification, are permitted provided that the following conditions
  8. * are met:
  9. *
  10. * 1. Redistributions of source code must retain the above copyright
  11. * notice, this list of conditions and the following disclaimer.
  12. * 2. Redistributions in binary form must reproduce the above copyright
  13. * notice, this list of conditions and the following disclaimer in the
  14. * documentation and/or other materials provided with the distribution.
  15. * 3. Neither the name of the copyright holders nor the names of
  16. * contributors may be used to endorse or promote products derived
  17. * from this software without specific prior written permission.
  18. *
  19. * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  20. * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  21. * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
  22. * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
  23. * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
  24. * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
  25. * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
  26. * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
  27. * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  28. * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
  29. * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  30. * SUCH DAMAGE.
  31. *
  32. * For additional information see http://www.ethernut.de/
  33. */
  34. /*
  35. * \file arch/arm/board/eir1.h
  36. * \brief Elektor Internet Radio board specific settings.
  37. *
  38. * \verbatim
  39. * $Id$
  40. * \endverbatim
  41. */
  42. #ifndef _DEV_BOARD_H_
  43. #error "Do not include this file directly. Use dev/board.h instead!"
  44. #endif
  45. #ifndef DEV_CONSOLE_NAME
  46. /* Removed in dev/board.h, but added here again for backward compatibility. */
  47. #ifdef NUT_DEV_DEBUG_READ
  48. #define DEV_CONSOLE_NAME "dbgu"
  49. #else
  50. #define DEV_CONSOLE_NAME "uart0"
  51. #endif
  52. #endif
  53. /*
  54. * Ethernet devices
  55. */
  56. #ifndef NIC_BASE_ADDR
  57. #define NIC_BASE_ADDR 0x30000000
  58. #endif
  59. #ifndef NIC_SIGNAL_IRQ
  60. #define NIC_SIGNAL_IRQ INT0
  61. #endif
  62. #ifndef NIC_SIGNAL_PDR
  63. #define NIC_SIGNAL_PDR PIOB_PDR
  64. #endif
  65. #ifndef NIC_SIGNAL_XSR
  66. #define NIC_SIGNAL_XSR PIOB_ASR
  67. #endif
  68. #ifndef NIC_SIGNAL_BIT
  69. #define NIC_SIGNAL_BIT PB20_IRQ0_A
  70. #endif
  71. #include <dev/dm9000.h>
  72. /*
  73. * RTC chips
  74. */
  75. #include <dev/pcf8563.h>
  76. #ifndef RTC_CHIP0
  77. #define RTC_CHIP0 rtcPcf8563
  78. #endif
  79. /*
  80. * MultiMedia Card devices
  81. */
  82. #include <dev/sbi_mmc.h>
  83. #ifndef DEV_MMCARD0
  84. #define DEV_MMCARD0 devSbi0MmCard0
  85. #endif